Liczymy pasujące modele…
I made these boxes for my own drawers based on my kitchen utensils, specially the knifes that I modeled to fit my specific set of knifes (Brand: Tramontina). As a starting point I generated the gridfinity boxes using an onshape template…
Wydruk około 10,14 €–12,39 € nettoWstępna wycena jednego wariantu
Silverware holder I made for the contest, Is easy to resize to fit your needs or print bed
I needed to learn SOLIDWORKS, and organize my silverware and utensils drawers. I made them short enough to print on my Neptune 4Max. I cut them down to 2 sections or less to stay under ½ roll of filament (approx 460gm) to allow 2 per…
I needed to learn SOLIDWORKS, and organize my silverware and utensils drawers. I made them short enough to print on my Neptune 4Max. I cut them down to 2 sections or less to stay under ½ roll of filament (approx 460gm) to allow 2 per…
I got tired of the forks, spoons and knives sliding to the back of the drawer on opening and closing so I made a stop. The width is 98mm. Length and width can be adjusted in the step file for your drawer needs. It creates a small space…
First made this as a remix of a kitchen utensil holder, it was functional but not very sturdy. I remade the whole thing in Fusion, it's a little thicker and has some trim round the top to give it a little more structure. No Supports…
This model is a great way to organize all of your silverware items!
This is 5% infill because I don't expect it to take much impact. You do you though.
Deigned for the LIANYU Silverware Flatware Set but works with most. Link below on utensils used. Made to print on the Prusa XL due to size. https://a.co/d/5MqXpzA
Friend of mine needed a drawer 90° rotated from original, as original one was not convenient. Worked out concept, took measures, designed in TinkerCad. Considered the max size of my printer (256x256mm). Focused on 250mm length. Added two…
Dimensions should be scalable to what ever you need. I used PETG at 0.15 layer height.
I designed for organizing and storing plastic silverware in our kitchen. It's parametrically designed, so it's easy to make changes to the dimensions. I printed it in PLA and then sealed it with Mod Podge Acrylic Sealer spray just to be…
I designed this to print on my Prusa MINI printer, fit my drawer (2.75" tall, 12 7/8" wide, 19" deep), and fit my silverware. The OpenSCAD file is attached so you can modify as you want. If you don't know how ask and I'll create a new set…
This is dimensioned around my silverware and what I use, so check your dimensions first before printing. There is a full size stl that you can use to cut down to your printer dimensions, or 4 parts that fit nicely on a Bambu x1
My friend asked me to design him a custom silverware drawer organizer to exactly fit one of his kitchen drawers. After designing and printing one for him I decided I could make this modular, and make it work for everyone. There are 3…
This is a silverware rack that allows you to save space in your sink while draining utensils. I designed it with a wider base so it would be stable, and it holds more utensils because the bottom of each section is wider, allowing the top…
Stacking silverware tray for top drawer in 2018-2020 Winnebago Revel. Got tired of having a mess of silverware, matches, rubber stoppers, paperclips, etc. floating around in the top drawer, so made up this quick two level drawer tray.
Feel free to use these files however you would like, just give me a shoutout!
Exact $15 Silverware set from Amazon: https://amzn.to/40KEViz Exact $6 Glass Straws Used in Design: https://amzn.to/40ICXzp I receive a small commission if you do decide to purchase the silverware set :) Attached is a Gridfinity…
This is for a GE dishwasher model number gdf630psm3ss silverware basket model number WD28X24476 AFTER A TEST RUN PETG IS STILL TOO SOFT AT THE DISHWASHER TEMPS. NEED TO USE A HIGH TEMP MATERIAL WITH HEAT RESISTANCE. I WILL BE PRINTING IN…
I got tired of my larger spoons always being strewn about the back compartment of the silverware organizer. Divider is 100mm long, 25mm wide and 33mm tall
A fun little project to work on. I printed mine with a translucent, color-changing PETG filament. Made to print on the Prusa XL or similar printer due to its size. Plenty of room for all your kitchen utensils. May be able to scale it to…
If you want a nice PETG print of this with minimal stringing, get a spool of Creality PETG Black and print it at 220 degrees C. Ignore that it says to print 230-250. That creates a stringing mess. 220 is perfect for that filament. You're…
Silverware Dryer that drains into your sink. Angled so that the water will drain out. Category: Kitchen & Dining
Created this to reduce chaos for kids silverware to avoid everything in a bin. The version in the picture was printed on a Prusa i3 MK3S+
Our silverware handles did not fit in the factory basket grid so I designed this one. Instead of three rows I did two rows with a third in the other direction that great for knives. It snaps in for a good fit that won't come loose but…
I designed this model to hold silverware at a campsite. It can be used just to hold silverware on a table, but it also doubles as a drying rack after washing silverware. It has 3 feet on the bottom so it could sit on a table, or has 3…
The origins of eating utensils can be traced back to prehistoric times, with early versions of knives and spoons being crafted from stone, wood, and bone. Knives were among the first tools used for cutting, dating back to the Paleolithic…
Really liked the Gridfinity silverware holders from breese-2 . I have some Ikea small drawers and they all have a slanted edge that I wanted to utilize to maximize space. These drawers fit the gridfinity grid with just a tiny bit of…
Replacement silverware drainer for dish drying rack. Mine broke and I figured I would 3D print another. I have been using this design for over 6 months and it has held up great, so I thought I would share it. Printed in PETG with…
Basic straw/silverware/pencil/whatever holder with a touch of whismy. Lots of ventilation and drainage and a curved floor to direct liquid down the drain holes. Daisy is printed separately for best chance of success and potential color…
My two cases for the WMF Nomad cutlery/ silverware broke and I like them a lot. So I decided to develop a case as replacement. Both parts are designed to be printed without support. After printing, a superglue is mandatory to glue the two…
🇺🇸 English description This custom silverware tray is made to fit very narrow drawers – just 183 mm (approx. 7.2") wide. It features four compartments for standard silverware (knives, forks, spoons, teaspoons) and two additional narrow…
Unique design to hold silverware. Exact silverware set used to make this is linked below. I used the Kingstone set on amazon. Affordable but quality stainless steel set, happy with it. Made with Solidworks, included SLDPRT, STL, and 3mf…
The existing silverware tray we had wasn't cutting it. We had sharp knifes mixed in with the butter knives and not enough room for the extra spoons. This was the first version I printed. Next version will we a little shorter, wider finger…
Wanted to play with the desk organizer tool, needed drawer organizers. This is what a couple of minutes of point and click spit out. I made these at 55mm, but resized to 37mm during slicing and made one print 5mm smaller to clear the…
The main challenge for this project was designing a multi-part system with tight enough tolerances for the pieces to slot together semi-securely without glue. I also optimized the parts to be material-efficient, reducing print time and…
When I got new silverware (Liberty Tabletop) I found that the width of the handles for most of the pieces were too large for the existing dividers in my dishwasher. I designed this replacement silverware divider lid for my Samsung…
5 slot Silverware Tray for a 215mm wide drawer. Fits Prusa MK4S Bed barely! Printed using Overture Black PLA. Tray itself is 248L x 208W x 75D in Millimeters. Height can be scaled down in the Z to achieve desired depth. Mine was printed…
basic tray for silverware still learning to use tinkercad pre sliced in sections to fit bambu A1 infill 5 to 10 percent should be more than enough its sectioned into 4 parts can use any type of super glue or if it fits tight enough leave…
Upgrade your kitchen organization with these Gridfinity-compatible Shadow Boxes designed specifically for silverware and serving utensils . This modular system brings the ease of Gridfinity storage into your kitchen drawers, cabinets, or…
This is a 3D printable drawer organizer designed to help you make better use of drawer space. It works well for organizing tools, office supplies, kitchen items, hardware, or hobby parts. The clean, modular layout makes it practical for a…
I got tired of the forks, spoons and knives sliding to the back of the drawer on opening and closing so I made a stop. The width is 98mm. Length and width can be adjusted in the step file for your drawer needs. It creates a small space…
First made this as a remix of a kitchen utensil holder, it was functional but not very sturdy. I remade the whole thing in Fusion, it's a little thicker and has some trim round the top to give it a little more structure. No Supports…
I wanted to organize my kitchen, and while I considered using https://www.printables.com/model/719729-gridfinity-complete-kitchen-collection-w-modular-e but found they were a bit tall for my liking, so I ended up designing my own that are…
I wasn't quite satisfied with the existing options for Gridfinity silverware bins, so I made my own. These bins work for my things in specific, but hopefully somebody can make use of some of these as well. All bins are 9 units tall (63mm…
Bottom Line, Up Front This is the only cutlery organizer tall enough to make maximum use of your drawer space and hold all of your silverware. What Else You'll Need This model is based on 2nd Dynasty's GridForge system. You'll need to…
Very simple model, I just made a series of boxes and slid them around until they matched my measured dimensions on the silverware. The Right-most area is left open at the top for longer items. There are a couple mm to spare on the sides,…
Simple silverware strainer that can be attached to the side of a drying rack. Printed in PETG with supports to the baseplate for the dryer rack attachment.
Silverware holder for dish drying rack. Air holes made square to avoid overhangs and bridging. The ‘hook’ on the back needs support. The support is included in the gcode if your printer is similar enough to a Prusa MK3. Made it so that I…
Loved the utensil holder design and wanted to make this so I didn't have to use mason jars anymore. There's a place for knives, forks and spoons! Thingiverse Model: https://www.thingiverse.com/thing:2191254 Printed in PLA on my MK3S+
I absolutely love my Knork silverware. Unfortunately, it does not stack well. After unsuccessfully finding anything off the shelf that would keep them stacked well, I decided to solve the problem myself. I have provided a very horrible…
Further enhancing my custom silverware tray for my Knork silverware, I made it modular. Mostly this was so that I wouldn't have to reprint the entire organizer if I chose to change the layout of my drawers at all. I have uploaded all…
This can be printed with or without magnet holes depending on which you like more and how many you need to print the magnet holes are sized for 10mm wide and 2mm thick circular magnets.
I created this modular drawer organizer to maximize space in my drawer as compared to a store bought one. The total length was too long for my ender 3 print bed so each tray is split in half and joined together using a piece of 1.75mm…
This is a customizable silverware holder that fits your specific silverware like a glove. No more sloppy generic buckets. As an added feature, it can stack with other gridfinity modules to make even better use of the drawer space. Note:…
Made this for my maytag dishwasher. Came with the house I haven't found any info about make just has the Maytag logo on it. It's plain white and probably 10 years old if i had to guess. But Maybe this will fit a newer one or help someone…
It's a silverware drawer organizer. It's also a fairly useful retraction test that can help you tune your ideal temperature and fan for your filaments, though if you're a hardcore optimizer, you'll of course want something that tapers…
For those who like their silverware, just so. Onshape Model: https://cad.onshape.com/documents/389f908e490017fc7826cefd/w/c1320e49c81665ffb51cfd92/e/b6e84193180af80f66153907
Fits 2 3/16" [55mm] wide organizer slots. Might fit some other similar styles of silverware, but for most it might have to be modified a bit. Maybe helpful as a starting point for some people.
Compact organizer for 56 piece IKEA 365+ silverware set. Will fit inside minimum size 245mm drawer width, 235mm drawer depth, 50mm drawer height. Includes single piece STL, and parts A & B to fit on MK3 print beds. Silverware set was…
Just some simple organizer pieces, I put some rubber feet on the bottom of mine so they don't slide around. I included models for two different sizes of containers, and split up puzzle-piece style models for printers (like mine) that…
Recomended to print with PETG and high quality (0.16mm or less) 2/7/2023 - Initial release 5/8/2023 - Final version 9/8/2023 - After using the latch for quite some time, I realized the bend can snap. The flex version includes adding more…
A spacer to keep an expandable bamboo silverware drawer insert from sliding around within the drawer. Scale to size in slicer. Insert at back of drawer. Print instructions THIS MODEL REQUIRES SCALING IN SLICER I used calipers to get the…
I liked the original, I like liked the remix. but i needed dividers so here we are. since the holes in the side and the holes in the bottom were not lined up i had to get creative but it ended up working just fine. since the high temp…
I wanted to build a silverware tray that had all of my utensils single-stacked and arranged as close to the front of the drawer as possible. Supported utensils, with dimensions (total length x max width) Utensil Max Length (mm) Max Width…
This is a compact silverware drawer/tray. Use it for silverware, scissors, or whatever you'll find it useful for. Features Prints without support (0,2 layer height) Tilted tray, to consume less space in the drawer. How to print? No…
The drainer didn't have a base for the water runoff so I designed it. I placed it on the raised edge of the sink. One of my firsts prints in PETG.
Purpose: Designed to mend and reinforce the bottom of your dishwasher's silverware/utensil basket, ensuring no more utensils slip through the cracks. Unique Feature: Crafted for durability and ease of application, this patch seamlessly…
After my cats broke the former stainer I decided to design my own inspired by the Artdeco era - simple compelling geometric shapes. I designed it to fit the Mini. I had to position the model diagonally to fit well.
Used Tinkercard to design a divider for a section of a bamboo silverware storage tray. Fits well and stays in place well using a drop of glue and double sided tape on the base. Printed in matte light brown PLA.
Silverware organizer models. Inserts were sized for “Marie Kondo Birch Expandable Flatware & Utensil Tray”(?). Measured to fit one of the "Splendide" silverware sets. I cut the version in the example photo out of wood using the dxf's, but…
I designed this simple plate for our old silverware dishwasher basket to prevent water drops from falling on the work surface. The dimensions of our Basked is 23cm by 13cm and the plate is slightly bigger so the basket fit inside. Print…
A simple drain caddy that allows you to stand silverware upright. The bottom is flared in order to support long and heavy silverware. All parameters are parametric.
This group of models was inspired by Gridfinity_1x5x6Utensil.3mf by clarkwgriswold on Thangs.com. His did not fit my silverware well, I wanted more depth, and his only had a fork/spoon holder - I wanted a whole set, so I designed my own.…
I liked the original from breese-2, but i wanted them to be taller to fit my drawers and to hold more silverware.
UPDATE: Added taller versions for the Teaspoons, Soup/Ice Tea and Fork Holder. Teaspoons now hold 32 and each of the others hold 16 of each type. Also slightly increased the length of the Soup/Ice Tea spoon holder to accommodate longer…
Two silverware drawer organizers 12" x 9.7" and 7.5” x 9.7” when printed at 100%. The two separate organizers both are 9.7” wide. One is 12” tall with 7 compartments the other is 7.5” with 3.
A compact, customizable silverware insert for narrow drawers. This particular design fits perfectly in the drawer of a friend's Escape 19 RV trailer and precisely secures their silverware set. The design was very simple to draw up. I…
Print as many as you need. I used standard size thumbtacks to mount, but a stronger mount or double sided tape may work better. The organizers can also be laid flat in a drawer, or arranged to be free standing. More attachments allowing…
Made to hold a bunch of plastic silverware. Cool hex design. I designed it before realizing it was too large for my printer… so no photo, unfortunately. The optimal print layout is on the back of the holder on the print bed, this way all…
Warning When printing from the STL Scale to 2500% (I am unsure how to rescale). This is a basic 3dmodel that I am uploading I am very new to fusion 360 I hope you enjoy.
When your wife needs something simple to organize some stuff in the kitchen you can't say no! My design was made in such a way that you can arrange them very easy,just drop them in their place. they can be printed vertical aswell if your…
A smaller, faster printing Hex Silverware Holder. I tried to design it for M3 inserts, but I wouldn't recommend using them. I had much better results welding the pieces together with a 3D Printing Pen. Includes bars that can be clipped…
