End Bar Shifter to Flat Bar Shifter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As I'm switching from end bar shifting on a U bar to flat bar shifting on a T bar on my recumbent, I designed this.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
As I'm switching from end bar shifting on a U bar to flat bar shifting on a T bar on my recumbent, I designed this to still use my Shimano SL-BS79.
Symmetrical.
No need to disassemble the levers to adjust position.
Should work also on many others models of bar end shifter or any device fixed in road bars (mirrors for example).
I printed the proto in black PLA then the two final assembly in PETG-CF to have better resistance to the external conditions.
No support needed.
Extra bits needed:
- 4*M3 inserts https://www.ruthex.de/en/collections/gewindeeinsatze/products/ruthex-gewindeeinsatz-m3-100-stuck-rx-m3x5-7-messing-gewindebuchsen
- 4*M3*25 screws and their washers
As most of my work here, the FreeCAD model is available. Maybe a bit messy time to time but editable.