Fujitsu A3C40152045 HDD Tray - Replacement clip

I snapped in half the clip that keeps the tray locked inside the front slot of my Fujitsu Primergy TX1330 M3 case. At first I thought it was game over and that I'd need to buy a new one; then I found out that the clip can actually be removed (as shown in picture 5), so I decided to design my own replacement part.

I designed this piece by referencing the original part from another tray I have, so it's pretty much identical as you can see in the pictures (the one with the green part is the original one) and, after a few trials and errors, it works just like the original.

To install it you need to remove the broken clip. You can do this with a screwdriver or a pair of tweezers, but be careful as you could damage the tray and make the issue worse.

This replacement part is compatible with the Fujitsu A3C40152045 tray, as shown in the pictures. This tray itself should be compatible with the following Fujitsu servers:

• RX2530 M1
• RX2530 M2
• RX2540 M1
• RX2540 M2
• RX1330 M2
• RX2530 M3
• RX2530 M4
• RX2530 M5
• RX2540 M3
• RX2540 M5
• RX2540 M5
• RX2530 M7
• RX2540 M5

...and all the TX lineup from M1 to M6 (I tested it on my TX1330 M3, as mentioned above). Please keep in mind that I'm not deeply familiar with the entire Fujitsu lineup. I compiled this list from a quick online search, so please make sure your tray is actually the A3C40152045 model or one that uses the same clip style before printing.

If you print this part, let me know which model you have by creating a Make on Printables.

I recommend printing this in PETG, as it needs some flexibility to properly open and close the bracket.