Shelf Bracket (Regalhalterung)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just another shelf bracket i designed for my workshop. The big holes are for 4.5mm screws to mount it at the wall. The…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 581
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Just another shelf bracket i designed for my workshop. The big holes are for 4.5mm screws to mount it at the wall. The small holes for 3mm screws are to fix the board on the top . If you have a glass plate like me, then use silikon. The holes are optimized for a long bit on your cordless screwdriver.
I printed it with a resolution of 0.3mm, a Infill of 25% and wihtout support.
I needed this parts very fast but you can print it with a smaller resolution and support to make it looks like smoother.
Category: Household