Skadis Screwdriver Mounts (Wera) for Ikea Pegboard (under 30 min!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts for your Screwdrivers in 3 different sizes, barely any support structures and under 30 mins of printing!
- Ocena
- 4 / 5
- Polubienia
- 17
- Pobrania
- 160
- Wydruki
- 2
- Wyświetlenia
- 620
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello Everybody,
I have designed 3 different sizes of screwdriver mounts for my skadis pegboard. You can use these with any screwdriver, as long as their shaft is not too big for the hole in the center. I have mounted my Wera VDE insulated screwdrivers, for which you need 1 large, 3 medium and 2 small mounts. They dont need much infill and have very little support structures.
they are only 5 grams each and take under 30 mins to print!
Happy printing and if you like the design, please upload your print for others to see!
Printer: Sovol SV06
Filament: Pla
Infill: 10% (plenty)
Support: On (for the little space under the hook)