1 / 4
Fidget Cactus / Ratcheting Cactus (PRINT IN PLACE)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very cool model, if you have a good printer, it requires NO setting changes!
- Ocena
- 4,5 / 5
- Polubienia
- 28
- Pobrania
- 128
- Wydruki
- 5
- Wyświetlenia
- 655
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 5) (Komentarze: 9)Remiksy (0)Kolekcje (29)Powiązane
PLEASE READ WHEN PRINTING
- The .3mf file has a pause in the slicer which allows you to change filaments for the cactus, NO AMS NEEDED!
- DO NOT use supports OR brim, no matter what the slicer tells you!
- VERY IMPORTANT: After it's done printing, let it cool down and take off the bed. Press down on the cactus firmly until you hear a click, then it will be able to twist.
- This was tested on the Anycubic Kobra 2 Neo & the Neptune 4 Pro, it should work on Bambu Lab Printers. If it doesn't, please feel free to add a comment and I will try and fix it.
- Anycubic Kobra 2 and Kobra 3 series, Bambu Lab printers, and Neptune 4 series should be able to print this without setting changes.
- If your printer ISN'T one of the printers listed above AND has bad tolerances please be aware the print might not work. You might have to change settings in order for this print to work.
Most importantly, HAVE FUN!