Mini R56 (Quadlock) topological phone holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A twist on mobile phone holders that hang onto the speedo of a Mini R56 (or similar)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 593
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Topologically optimised phone holder to replace the cheap metal plates that can be found on all famous online shopping websites.
This is optimized with nTop to try and maximise stiffness and raise the modal frequencies to avoid “shaking” at idle or on bumps, and most time it works.
Originally designed to fit a Quadlock (all rights reserved) lock plate on the “swan neck”, but this can be re-designed to accomodate other locking mechanisms or different angles (hence the swan neck separated from the main topology body.
Requires some mounting hardware :
- 3 x M3x8 Countersunk head bolts
- 3 x M3x4x5 heatserts that go in the swan neck
- 2x plastic screws to fit on the back of the tachometer (you might be able to reuse the original screws
- If using the Quadlock version of the swan neck, you will need the locking plate (the round thingy with the 4 flaps) and the accompanying M5 countersunk screw, and one M5 heatsert to fit in the swan neck.
- Recommended to add some soft foam (like Nitto) between the speedo and the mount, near the screw tubes.
Printing recommendation :
- PETG or better for stiffness
- Tree supports
- Either with the rearmost face laid flat, or with the 45° face behind the swan neck mounting bolts laid flat. See screenshots for reference.
Position 1 :
Position 2 :
Post-processing is recommended : UV-resistant painting, and for smooth finish, polyester mastic and wet sanding (before painting). Alternatively can be SLS printed and manually finished, looks quite snazzy