1 / 3
Prusa XL Heat Bed Controller Cover WITH Exhaust Shroud
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Exhaust shroud/heat bed cover with directed exhaust to facilitate maximum cooling of the heat bed controller
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 79
- Wydruki
- 6
- Wyświetlenia
- 580
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 6) (Komentarze: 18)Remiksy (0)Kolekcje (40)Powiązane
I took the already great cover and shrouded part of the cover to facilitate maximum convection cooling. I superglued 2 connectors inside the cover to allow for a point to connect cooling fan or a bentobox carbon filter.
I attached the slicer file to the project. Printed in Prusament PC-CF.
I used the following:
- https://a.co/d/0pq8Oj5 - 50mm 5015 Blower Fan 24V
- https://a.co/d/1lKycAU - Easycargo 10pcs 14mm Heatsink 14x14x7mm + pre Applied 3M 8810 Thermal Conductive Adhesive Tape for Cooling Cooler GPU Chips
- https://a.co/d/808QpyT - uxcell a12080600ux0947 Bimetal Temperature Control Switch Thermostat (Pack of 10)
- (2) M3x22
- (2) https://a.co/d/6oXjde0 - WAGO 221-412 Lever-Nuts - 2-Conductor Compact Splicing Connectors (Pack of 10)
- (2) https://a.co/d/7vNN351 - Spade Connectors (red ones)
- (2) M3 Nuts …. They come with the fans! YAH!!!!
I'm currently doing a full bed print of Prysament PC-CF. I would overheat all the time but now not once!
