Horned Dragon

This dragon head requires support, but I have taken the steps to make the slicing setup extremely easy for you. I included the “.3mf” file you can load in PrusaSlicer; it has my painted on supports and optimized lightning infill to make this easy to print and minimize the filament needed. I also included “.gcode” files for the Prusa MK3/S/S+; if you have one of those machines you can use that file to start the print now without even having to slice the model.

This model requires two different prints. Print “Snow Dragon Head (No Big Horns)” and “Horns and Pins”. The second print has both horns and the two pins to attach them to the head. I have also included files of both horns and the pins separately.

Assembly: Simply slide the pins into the head (pointy side out towards the horns) and then slide the horns on. The horns should curve towards one another; I have oriented the pins differently so it will be obvious if you have horns on the wrong sides. It wouldn't hurt to use a little glue, but shouldn't be necessary.

For similar models see my Collection of Animal Heads/Busts that I have designed or remixed. All of these designs use the same bracket to mount, making them interchangeable. My other popular Dragon can be found there.

Mounting Options:

• Bracket for Wall Mountings - mounts firmly to wall with one screw (use top hole).
• Modular Stand - print and press together a stand to put this on a table or desk.
• I've also included a small slot, so this can be hung on a wall with a nail.

One minute introductory video for my Bracket for Wall Mountings:

*Enjoy and if you print one please post a make!*