8mm Bearing Hub (688 thrust bearing) for Rotor Kites or What Have You
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bearing hub for large rotor or "UFO" style kites. Accepts a 688 bearing and fits onto an 8mm OD spar or rod.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Public Domain
This is a very niche application design, but why not share?
Designed for larger rotor or "UFO" style kites, this 3-part hub accepts a 688 bearing by press fitting it into the center sleeve and has two stopper cuffs to keep it in place on an 8mm spar or rod. The sleeve has a deep groove for attaching a fly line. This kit also comes with a tool for pressing the bearing into the sleeve.
Make sure your printer and slicer are well calibrated since the tolerances are rather tight.
I recommend printing with a light-colored PETG.
