Faucet shelf and Dishcloth hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shelf which can be attached to your faucet with a hanger for your dishcloth
- Ocena
- 0 / 5
- Polubienia
- 48
- Pobrania
- 126
- Wydruki
- 1
- Wyświetlenia
- 808
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A shelf which can be attached to your faucet with a hanger for your dishcloth. The arm can swivel so you can rotate it out of the way when not using it.
I got inspired by the remix of my faucet shelf by @Skalman so I combined the two and created this model.
If you don't need a hanger but two shelves, see my dual shelf model.
Sizes
Different versions for different faucet diameters:
- 19 mm
- 21 mm
- 25 mm
- 28 mm
Two different hanger lengths:
- 160 mm
- 200 mm
Print instructions
I printed mine in PETG. The clamp around the faucet needs to be able to flex to mount it on your faucet. I am not sure if this will work with PLA.
Print the desired size shelf and knob and hanger. And print one axle and two c-clips.
- Shelf: use tree support for the shelf. For strength I suggest 3 or more walls.
- Knob: print without support and the screw thread facing downwards.
- Hanger: to make it more rigid I suggest 4 or more walls and a higher infill percentage. Use a brim if you experience warping.
Assembly
Remove the support structure from the shelfbase and insert the hanger into the shelf. Insert the axle through the shelfbase and hanger. It is a precise fit so you may need to do a bit of sanding or cleanup before you can get it through. Use some small pliers to place the c-clips on both ends of the axle to secure it in place. Note the correct orientation of the clip with the flat sides to the bottom assuming you have the axle in the print orientation.
History
2025 05 30 added a 19 mm version