Adjustable, Over-Keyboard Stand for Supernote Ax2 Manta
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modification of @scarypug's drawing tablet stand, adjusted for Ratta's Supernote Ax2 Manta in portrait orientation
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 70
- Wydruki
- 1
- Wyświetlenia
- 776
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple modification of @scaryPug's fantastic adjustable drawing tablet stand, adjusted to be a bit longer and much narrower. This is intended to hold my Supernote AX2 Manta eink tablet for note-taking, in portrait orientation.
Update - I accidentally uploaded the incorrect, original width! I sincerely apologise for this, and thank you to @Plastic-Geologist978 for pointing this out to me on Reddit. I have replaced all the files with new uploads now.
Printed on an MK3S with E3D Revo RapidChange Nozzles and the HF 60W heater element.
- Printed the FrameFront2 part (the bottom holder that prevents the tablet sliding downwards) in Polymaker's Polylite TPU90 with a 0.6mm nozzle
- Printed the main frame legs (and the adjuster legs) in eSun PLA-CF, with a hardened 0.6mm nozzle.
- The tension adjuster knobs and inner caps I printed with a 0.25mm nozzle, using Prusament Marble Grey.
- Everything else was printed with a 0.4mm nozzle using eSun PLA+