Drainer (spiral / vase)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
spiral/vase print to remove liquid from suspensions as filter or hold silica gel or with cotton room scent
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 75
- Wydruki
- 1
- Wyświetlenia
- 779
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
What?
• Put this e.g. in your yogurt for an hour and water will accumulate in it ↦ makes it more creamy as strained yogurt (Greek: strangistó giaoúrti Turkey:Süzme Yoğurt ).
• Or to filter .. the thread is a PCO-28 (standard PET bottle cap ) so you can use these caps to close.
• Also can be used to wash small parts.
• For Silica Gel pearls desiccant dehumidifier
• Use some cotton as carrier and fragrance oil/essential oil or perfume as room/car scent box
FOOD and printing
- first select a plastic that is FDA-approved
- make sure the pigments are safe too - best to use clear PET-g
- As prints never have a smooth surface and filter surface increasing that
- the strings should be round and smooth however wash in hot water (60°C)
- rinse or keep in a bag with alcohol (ethanol or isopropyl (2-propanol) )
- keep dry or in the freezer to minimize any bacteria growth
how multiwalled?
This print features multiwalled threads in spiral mode due to the use of small cuts that are placed so the spiral path fuses and allow two shells - the cuts are parameterized for your nozzle diameter and layer height.
- spiralprinting / vase mode is mandatory
- print slow so strings form nicely
- select model according to your nozzle 0.4mm ∅ (or .2)
- select layer according to model 0.2 or 0.3 ( 0.1)