Oxford Hotgrip Control Mount for 22mm Handlebar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An alternative mount to the motorcycle handlebar if it is difficult to attach the platform to the mirror clamps.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Required: 2x M6 nuts (you will probably have to press them into place with a soldering iron).
You can use the supplied stock bolts with Grips (M6x27) or install M6x30 to your taste.
It is recommended to use Loctite to fix the threaded connection. I intentionally left a fairly narrow hole for the screw threads, it will help prevent loosening to some extent.
I printed in PETG with a small support for the holes for the nut, z-offset 0.1 (a little more time for cleaning, but more accurate).
I highly recommend calibrating your printer for the correct print sizes, and positioning the models as shown in the screenshot (this will achieve greater strength than using interlayer bonds).