Oxford Hotgrip Control Mount for 22mm Handlebar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An alternative mount to the motorcycle handlebar if it is difficult to attach the platform to the mirror clamps.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 58
- Makes
- 0
- Views
- 198
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Required: 2x M6 nuts (you will probably have to press them into place with a soldering iron).
You can use the supplied stock bolts with Grips (M6x27) or install M6x30 to your taste.
It is recommended to use Loctite to fix the threaded connection. I intentionally left a fairly narrow hole for the screw threads, it will help prevent loosening to some extent.
I printed in PETG with a small support for the holes for the nut, z-offset 0.1 (a little more time for cleaning, but more accurate).
I highly recommend calibrating your printer for the correct print sizes, and positioning the models as shown in the screenshot (this will achieve greater strength than using interlayer bonds).