Creality CR-6 SE Bed Mount for Logitech C270
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple remix to combine the bed handle with tripod mount and the C270 mount
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A simple remix to combine the bed handle with tripod mount and the C270 mount
Thanks to Forty206 and Z3R0-1989 for their original files
IMPORTANT: When added to slicer I dropped the object by a millimetre or two so it had a flat base on the bed. [EDIT: This seems to have been my downfall as I've lost my camera offset!]
VERSION 0.1
Printed at 0.12mm layer height | 3 wall loops | 4 top layers | 3 bottom layers | 30% gyroid infill
After printing, the part failed / broke at layer 386 (where it finished the camera mount and goes to only the two ‘arms’)
VERSION 0.2
I updated the model to remove the internal screw thread, and printed a test version at 0.2mm
After printing and installing, the large fan shroud of the hot-end crashed into the camera mount when running ABL so I'll need to offset the camera further to avoid this.
I made a few extensions to determine how far back I wanted to go for version 0.3
VERSION 0.3
Changed orientation of camera mount as well as removed the screw-on part in favour of clips
VERSION 0.4
Longer and thicker (!) will print with PETG too as the PLA was starting to curve with the heat