Creality CR-6 SE Bed Mount for Logitech C270
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple remix to combine the bed handle with tripod mount and the C270 mount
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 11
- Makes
- 0
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
A simple remix to combine the bed handle with tripod mount and the C270 mount
Thanks to Forty206 and Z3R0-1989 for their original files
IMPORTANT: When added to slicer I dropped the object by a millimetre or two so it had a flat base on the bed. [EDIT: This seems to have been my downfall as I've lost my camera offset!]
VERSION 0.1
Printed at 0.12mm layer height | 3 wall loops | 4 top layers | 3 bottom layers | 30% gyroid infill
After printing, the part failed / broke at layer 386 (where it finished the camera mount and goes to only the two ‘arms’)
VERSION 0.2
I updated the model to remove the internal screw thread, and printed a test version at 0.2mm
After printing and installing, the large fan shroud of the hot-end crashed into the camera mount when running ABL so I'll need to offset the camera further to avoid this.
I made a few extensions to determine how far back I wanted to go for version 0.3
VERSION 0.3
Changed orientation of camera mount as well as removed the screw-on part in favour of clips
VERSION 0.4
Longer and thicker (!) will print with PETG too as the PLA was starting to curve with the heat