Rocchetti di varie dimensioni Coils of various sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Semplici rocchetti di varie dimensioni per sistemare cavi e fili vari Simple spools of various sizes
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 64
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
Dall'esigenza di riporre in maniera ordinata il rame smaltato quando si riavvolge un trasformatore nascono questi semplicissimi rocchetti a vite (per poterli stampare senza supporti, tempo di stampa circa 50 min a 200 mm/s). Sono composti da 2 metà che si avvitano tra loro, nulla di più semplice, filetto m16. Disponibili in 3 misure (diametro 60/80/100), potete usarli anche per sistemare cavi vari e non solo. Se avete una stampante precisa (tipo prusa o bambulab) si avvitano senza problemi, altrimenti nello slicer scala leggermente il filetto maschio o ripassa la femmina con un bullone m16 :)
Buone stampe
From the need to store enameled copper in an orderly manner when rewinding a transformer, these very simple screw reels were born (to be able to print them without supports, printing time about 50 min at 200 mm/s). They are composed of 2 halves that screw together, nothing simpler, m16 thread. Available in 3 sizes (diameter 60/80/100), you can also use them to arrange various cables and more. If you have a precise printer (like Prusa or Bambulab) they screw without problems, otherwise in the slicer slightly scale the male thread or repass the female with an m16 bolt :)
Happy printing