1 / 8
Rocchetti di varie dimensioni    Coils of various sizes — image 1
1 / 8

Rocchetti di varie dimensioni Coils of various sizes

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Semplici rocchetti di varie dimensioni per sistemare cavi e fili vari Simple spools of various sizes

Rating
5 / 5
Likes
3
Downloads
17
Makes
1
Views
64
Reviews
1

Updated at source:

Model information

Category
Electronics
License
GNU General Public License v3.0

Dall'esigenza di riporre in maniera ordinata il rame smaltato quando si riavvolge un trasformatore nascono questi semplicissimi rocchetti a vite (per poterli stampare senza supporti, tempo di stampa circa 50 min a 200 mm/s). Sono composti da 2 metà che si avvitano tra loro, nulla di più semplice, filetto m16. Disponibili in 3 misure (diametro 60/80/100), potete usarli anche per sistemare cavi vari e non solo. Se avete una stampante precisa (tipo prusa o bambulab) si avvitano senza problemi, altrimenti nello slicer scala leggermente il filetto maschio o ripassa la femmina con un bullone m16 :)

Buone stampe 

From the need to store enameled copper in an orderly manner when rewinding a transformer, these very simple screw reels were born (to be able to print them without supports, printing time about 50 min at 200 mm/s). They are composed of 2 halves that screw together, nothing simpler, m16 thread. Available in 3 sizes (diameter 60/80/100), you can also use them to arrange various cables and more. If you have a precise printer (like Prusa or Bambulab) they screw without problems, otherwise in the slicer slightly scale the male thread or repass the female with an m16 bolt :)

Happy printing

Tags