Raynox x Olympus 60mm Lenshood (DCR-250, MSN-202, 60mm f/2.8 Macro)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lenshood specifically for the Olympus 60mm f/2.8 Macro lens with either the Raynox DCR-250 or MSN-202 attached
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A smaller and more satisfying to use version of the original Raynox universal clips, specifically for the widely spread Olympus 60mm f/2.8 Macro lens.
@Ferdinand_173643 has designed a beautiful Lenshood (Thank you! <3), which I remixed in a way that I used his locking mechanism and added a 37mm and 43mm filter thread to screw in either of the Raynox lenses. (DCR-250, MSN-202).
I provide stl and stp files for both Raynox lenses, version 1 prints the thread separately to save material on supports (needs to be glued). Version 2 is in one piece.
Printed these with a 0.6mm nozzle, 0.2mm layer in PLA and PETG, both worked fine but probably 0.4mm nozzle would be better.
I recommend using matte material to avoid any reflections and please try using the fuzzy skin function. The overall appearance will highly profit from it!
For now there is only a version which works if you’re using a UV-Filter with the Olympus lens.