Dart Zone Max Solo ___ Auto Feeding Inline Clip ___ NO FLICK ___
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Auto Feeding Inline Clip ___ Dart Zone Max Solo ___ Flicking the blaster before shooting is NOT necessary
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 157
- Wydruki
- 3
- Wyświetlenia
- 1132
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Dart Zone Max Solo
Auto Feeding Inline Clip
Inline clip for 3x short darts for the Dart Zone Max Solo.
Flicking the blaster before shooting is NOT necessary because I kept the inner diameter of the dart storage area very tight and adjustet the diameter and length of the barrel to the plunger volume of the Max Solo. The dart is therefore transported to the narrower barrel area by the air pressure itself during shooting.
Approx. 85-95 fps (red X-Shot half darts).
There are two versions available - with sights or with top picatinny rail.
- Update 5.4.2025:
Added a sleeve for the front sight to add some color there for better visibility.
(The Streamlined Release Lever shown on the pictures can be downloaded here)
The files are already pre-oriented.
My print settings for PLA:
0,2mm layer height
5 walls (minimum 3 walls - if your printer also prints the barrel with 3 walls airtight)
20% gyroid infill
7 top and bottom shell layers
supports are needed
Thanks to DuBois for the files I could use for this remix.