Bosch AL 3640 CV charger wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A means to mount this oddly shaped, wall-phobic charger on the wall
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to mount this charger on a wall, but it seemed to have very few opportunities to do so easily, However I noticed that it has some recessed apertures on the underside that would allow clips to be inserted. I've created some feet that can be screwed to the wall, these have sprung clips that will lock into the underside of the charger. The feet need to be arranged quite precisely, and so a mounting template is included. It is possible to attach all 5 clips, but one on each corner should suffice. Note that the bottom left hand clip if of a different type.
Correct fitting requires the clips to be placed precisely – perhaps loosen the screw a little to allow a little play to account for some degree of inaccuracy. Removing the charger requires forceful breaking of the clips (and then printing another set), and perhaps removing broken clip parts from inside the charger (unplug it first!), so it's worth taking the time to get it right on the first attempt.
Printed in PETG with 50% infill. The supplied 3MF file also includes some modified areas that apply a 100% infill to the clips.