Detroit Lions Magnet (Low Waste)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed in Hueforge for low filament waste & color swaps
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
🦁🏈🧲Detroit Lions Magnet
Show off your Detroit Lions pride with this 3D-printed magnet, designed for crisp color separation and a bold look! Perfect for any Lions fan, this print is a great addition to fridges, lockers, or any magnetic surface.
🔹 Print Details:
- 100% infill, 0.2mm layers
- Ironing enabled for a smooth top finish
- Print Time: ~1h12m
- Filament Usage: 25.95g
- Fans OFF – Keep your enclosure cracked open to prevent heat creep
- Includes an 8x3mm magnet slot (resizable)
- Pre-set Hueforge print settings included (0% fans – adjust ventilation accordingly)
🔹 Filament Swaps:
1 Start with Basic Light Gray (Any gray can be used but the lighter the better, if you don't have a gray see below)
2 Swap to Matte Ivory White at Layer #19 (3.8mm)
3 Swap to Matte Marine Blue at Layer #21 (4.2mm) (Bambulab Basic Cyan is a good alternative)
Alternative Version:
If you don’t have gray filament, use the Black & White Blending Profile:
- Uses Black instead of Gray
- Changes ironing from all top surfaces to top-most
- Lowers the White swap to Layer #18 (3.6mm)
Perfect for lockers, fridges, or any magnetic surface – show your Detroit Lions spirit in style! 🦁🏈🧲