Ender Sprite pro filament run out sensor and 4010 blower fan parts cooler upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
filament run out sensor and second 4010 blower fan part cooling bracket for the ender sprite series
- Ocena
- 3 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 279
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Originally it was just the filament sensor bracket designed by twammons on thingiverse which is fantastic, but I then wanted to add a second fan for part cooling that is a direct bolt on and doesn't get in the way of anything yet also assists the heat brake cooling fan by pulling the air through it with this second fan.
After 5 iterations and redesigns it is perfect and ready to print for anyone to use!
This gcode file is designed with 100% line infill varied for the air duct, cassette bracket, screw stands, and ziptie brackets.
There is also the base stl file incase you wanted to add your own parameters.
Best to print it with supports with the cassette bracket on the bed.
Just wire the 4010 blower fan wires in parallel with the stock part cooling fan.