1 / 13
Pietro Grinder Cup Funnel 58mm for Filter and Espresso
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pietro Grinder Cup Funnel 58mm for Filter and Espresso
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Pietro Grinder Cup Funnel 58mm for Filter and Espresso
I made this funnel to make it easier to throw grinded coffee from a Pietro cup into V60. But then I decided to adopt funnel size to 58mm basket. So now it helps in both cases: for filter and espresso.
Tried to find the best settings for overhangs and bridges. But I'm new to modeling/printing. So feel free to tune settings and share your results in Makes & Comments.
For Orca Slicer
- Quality
Bridges:
- Thick bridges [unchecked]
- Thick internal bridges [unchecked]
Overhangs:
- Extra perimeters on overhangs [checked]
- Reverse on even [checked] - Strength
Walls:
- Wall loops: 2
Infill:
- Sparse infill density: 3.65% - Speed
Overhang speed:
- Bridge: 10 External; 10 Internal - Support
Support:
- Enable support: [checked]
- Style: Grid
Advanced:
- Top Z distance: 0.15 mm
- Bottom Z distance 0.15mm
- Top interface layers: 3
- Bottom interface layers: 1
- Interface pattern: Concentric
- Top interface spacing: 0.1 mm
- Bottom interface spacing: 0
- Support/object xy distance: 0.2 mm
There are two holes for 5x3 magnets.