1 / 13
Pietro Grinder Cup Funnel 58mm for Filter and Espresso — image 1
1 / 13

Pietro Grinder Cup Funnel 58mm for Filter and Espresso

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Pietro Grinder Cup Funnel 58mm for Filter and Espresso

Rating
0 / 5
Likes
2
Downloads
47
Makes
0
Views
385
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

Pietro Grinder Cup Funnel 58mm for Filter and Espresso

I made this funnel to make it easier to throw grinded coffee from a Pietro cup into V60. But then I decided to adopt funnel size to 58mm basket. So now it helps in both cases: for filter and espresso.

Tried to find the best settings for overhangs and bridges. But I'm new to modeling/printing. So feel free to tune settings and share your results in Makes & Comments.

For Orca Slicer

  1. Quality
    Bridges:
    - Thick bridges [unchecked]
    - Thick internal bridges [unchecked]
    Overhangs:
    - Extra perimeters on overhangs [checked]
    - Reverse on even [checked]
  2. Strength
    Walls:
    - Wall loops: 2
    Infill:
    - Sparse infill density: 3.65%
  3. Speed
    Overhang speed:
    - Bridge: 10 External; 10 Internal
  4. Support
    Support:
    - Enable support: [checked]
    - Style: Grid
    Advanced:
    - Top Z distance: 0.15 mm
    - Bottom Z distance 0.15mm
    - Top interface layers: 3
    - Bottom interface layers: 1
    - Interface pattern: Concentric
    - Top interface spacing: 0.1 mm
    - Bottom interface spacing: 0
    - Support/object xy distance: 0.2 mm

There are two holes for 5x3 magnets.

Tags