Delta/Rockwell Drill Press (Head) Dust Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-in dust cover for top of Delta 15-017 drill press.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 1
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I found a fair amount of dust settling in the top (head) of my drill press overtime where the pulleys and belts are located so I created a cover to remedy the problem.
*Snap-in fit and easy to remove with two clips on the underside.
*Designed to fit the Delta Rockwell 15-017 drill press.
Slicer Software/Supports Used: Bambu Studio - Standard supports were enabled for the clips. **Print upside down to use less filaments for supports.***
Additional notes on print settings: Although not likely needed, I changed some settings for the print to make it more durable for long term use-
*Wall loops = 6
*Bottom Shell layers = 5
*Sparse infill Density = 25%
Printer used: P1S 0.4 nozzle
Filament type and amount used: Bambu PETG HF - 36.71g
*Any filament can be used, but I prefer PETG for shop items.
Print Time: 49min38sec (including prep time) 43m6s (model only)
Approx. Cost: $0.92
**Happy 3D Printing and Woodworking**