1 / 3
Wandkonsole Handlauf Ø40 / Wall console handrail Ø40 — zdjęcie 1
1 / 3

Wandkonsole Handlauf Ø40 / Wall console handrail Ø40

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Einfach Wandkonsole für Stirnseitiges anschrauben Handlauf Ø40 / Simply screw on wall bracket for end face Handrail Ø40

Ocena
0 / 5
Polubienia
4
Pobrania
11
Wydruki
0
Wyświetlenia
51
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Ich habe hier ein Wandkonsole zum Stirnseitigen befestigen eines Handlaufes aus Holz mit einem Durchmesser von 40mm erstellt.

Die Bohrung des Handlaufes läuft konisch zu und wird nach hinten hin enger (vorne Ø40,2mm, hinten Ø40,1mm).

Ggf. muss etwas mit Schleifpapier (an der Konsole oder dem Handlauf) nachgeholfen werden.

Das drucken dieses Modelles geschieht auf eigene Gefahr! Ich übernehmen keinerlei Haftung für Personen- und/oder Sachschäden! Jeder muss das Modell selbst bewerten und einschätzen!

________________________________________________________________________________________________________________

I have created a wall bracket for attaching a wooden handrail with a diameter of 40mm at the front.

The hole in the handrail is tapered and becomes narrower towards the back (front Ø40.2mm, back Ø40.1mm).

It may be necessary to use sandpaper (on the bracket or the handrail).

Printing this model is at your own risk! I accept no liability for personal injury and/or damage to property! Everyone must evaluate and assess the model themselves!

Tagi