Snap-In Air Vent for DIY Grow Boxes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-In Air Vent for DIY Grow Boxes (Fits IKEA Transparent Bins)
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple snap-in Air Vent designed for DIY grow boxes made from transparent plastic containers, such as those from IKEA (e.g., SAMLA boxes). It enables better air circulation and is easy to install without glue or screws, just a 10mm drill bit.
Designed for standard plastic boxes
Helps with airflow and reduces humidity buildup
I added a bigger and a smaller version.
🛠 Installation:
Drill a 10mm center hole in the wall of your box using a standard drill bit.
Snap the Air Vent into the hole
Using the same 10mm drill bit, drill additional air holes in the leaf-shaped gaps of the Air Vent design. Use these gaps as guides for aligning the ventilation holes.
🖨 Print in PETG or hard TPU – PLA might be too brittle for the snap-fits.