osVAC M32 Dust Brush Nozzle Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D Printed connector for Aliexpress Dust Brush
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A brush for your osvac vacuum. I got tired of stacking adapters and straight up made this aliexpress dust brush into a osVAC compatible nozzle. There are many sellers offering this part, just search around and compare to the attatched image.
Just crush it a bit (i used a vise), insert a wide tip flathead screwdriver, and pry the original apart. Then firmly press in the new 3D printed piece.
It needs to be a bit flexible for insertion, so I recommend using PETG or PP for printing it.
I attatched a variant with modeled-in supports, print it on a multimaterial printer or do as I did and use the marker trick to get clean results.
The source files (f3d and STEP) are attatched. I invested minimal time and used no clean modelling practices, modify at your own risk.
Post makes and happy printing!