1 / 9
Classy Stand for Lithophane Full Size Moon Lamp - Solar System Compatible
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Classy, clean stand for the Lithophane Solar System Models
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 467
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
Model is orientated so the most interesting part of the moon (threaded moon from Solar System) is front and center. Wire directly in the back.
81mm Tall / 3.2 inches
Recommendations:
Easy model to print and looks super classy. Your regular settings should be fine. Here are some recommendations:
- Print in PLA/PLA+/Pro
- Layer height: try using Adaptive Layer Height with a layer height set at .15 and get the model to look like my adaptive layer height picture. White is .15 layer height, red is .3 layer height. DOES NOT need to be exact. USE the SMOOTH button in the adaptive layer height settings of your slider
- Take note where the seam is after slicing. Aligned should work fine. However, if the seam is not nice and straight down the back where the wire hole is, set seam position to BACK and POSITION the base so that the cord hole towards the back of your printer
Print Settings - No Support required
- No Brim
- No Rafts
Printing parameters:
- Resolution: Due to the threads .15 is best. However, Adaptive layer height is even better. Speed + Accuracy
- Perimeters: .6 nozzle: 2 walls; .4 nozzle 3 walls
- Wall Generator: .4 nozzle: Classic; .6 nozzle Arachne
- Infill: .4 nozzle: 20%; .6 nozzle: 0%
- Wall Order: .4 nozzle: Inner/Outter/Inner; .6 nozzle: Outter/Inner
- Supports: no