CCS to NACS Adapter Holder with Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CCS to NACS Adapter Holder with Cap
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 529
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I redesigned a CCS to NACS Adapter holder with a cap. Made for storing a CCS adapter for cars that use NACS (Tesla, 2025 Hyundai IONIQ 5, etc).
I have included a version with a TPU gasket to prevent rattling and a version without. Even the version without the gasket doesn't rattle as it is friction fit, but might loosen over time.
The cap is also optional, but if it's placed in an area that might bring dust (like where I put mine in front of the center console), it would probably be best to have.
The gasket and cap should be printed in TPU or flexible filament, and the shell should be printed in a heat resistant material such as PETG or ABS to handle temperatures in a hot car.
All parts should be friction fit, but can be adhered with some CA glue.
No supports needed.