Voron Stealthburner 33 BambuLab Swiss3Dc Starlex DHB 33 Hotend holder Max Flow Rate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A straightforward method to install the Swiss3DC Starlex DHB 33mm high flow hotend onto the modified Stealthburner Head.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
To enable Voron Builders to take advantage of the Starlex DHB eco-system for the Voron Stealthburner print head, we have modified the original Step components to fit the BambuLab Heat Sink X1 and P1 series in both the front and back heat sink holders.
This modification has been crafted to keep the original nozzle height unchanged bringing up the heat sink while highly increasing the melt zone to reach over 33mm3/s. Increased the air flow shroud.
Removing the Starlex DHB 33mm nozzle requires no tools.
We offer 2x 24, 30, 40 and 60W heaters with JST or Microfit connectors.
Hardened steel and brass nozzles are available in sizes 0.2/0.4/0.6/0.8mm.
Probably, a light move of the bed sensor back by 2mm is needed to access freely the Starlex DHB opening system. X_Carriage left and right to be modified.
Additionally, Starlex DHB 24mm can also be purchased.