Ikea Hack Rack (KNAGGLIG edition)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Files to convert the Ikea KNAGGLIG storage box into a mini 5U home server rack / minilab / homelab (work in progress)
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 2056
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Files to convert the Ikea KNAGGLIG storage box into a mini 5U home server rack / minilab / homelab. You'll need two of the side rails to get started and from there its up to you! I have included templates for 1U and 2U panels if you wish to modify for your own devices.
The space between rails is approximatley 166mm
Mount your tech using M6 bolts.
If you want to print a “mesh” rack, simply turn off the top and bottom layers, increase the perimeters for rigidity and switch to honeycomb infill.
Credits:
For mounting a full sized Pi you will need this mount which works with my rail design: https://www.printables.com/model/227181-mp-1-rack-raspberry-pi-2-3-2u-rack-mount
Although I created everything here from scratch, I was very inspired by the following models:
Rack for Netflix switches:
https://www.printables.com/model/702219-10in-rack-netgear-gs108
Lab Rax 10" server rack 5U:
https://makerworld.com/en/models/1294480-lab-rax-10-server-rack-5u#profileId-1325352