Fuzzy Skin Test Hexagon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple hexagon with 6 different patterns of fuzzy skin options: 0.1-0.6mm. Distance always equals thickness.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 146
- Wydruki
- 4
- Wyświetlenia
- 370
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
I stopped uploading and updating my models here at Printables!
My actual models can be found on my MakerWorld profile – with print profiles.
Take care to use the newest models …
There are a lot of models for test prints of different fuzzy skin options generated by the slicer, but they are often too big, so they need a lot of time and filament to print.
I find the best settings are when the skin point distance has the same value as the thickness of the fuzzy skin.
So I made a small model with 6 different patterns of fuzzy skin options: 0.1-0.6mm with distance = thickness.
It only needs about 15g of filament and is printed in about 50 minutes on a modern printer.
Scalable down to 75% which reduces time and filament to about 50%, but I prefer the original size.