Fuzzy Skin Test Hexagon
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple hexagon with 6 different patterns of fuzzy skin options: 0.1-0.6mm. Distance always equals thickness.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 146
- Makes
- 4
- Views
- 370
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
I stopped uploading and updating my models here at Printables!
My actual models can be found on my MakerWorld profile – with print profiles.
Take care to use the newest models …
There are a lot of models for test prints of different fuzzy skin options generated by the slicer, but they are often too big, so they need a lot of time and filament to print.
I find the best settings are when the skin point distance has the same value as the thickness of the fuzzy skin.
So I made a small model with 6 different patterns of fuzzy skin options: 0.1-0.6mm with distance = thickness.
It only needs about 15g of filament and is printed in about 50 minutes on a modern printer.
Scalable down to 75% which reduces time and filament to about 50%, but I prefer the original size.