295 modeli
Using TheBrokenNerd83's design ( https://www.thingiverse.com/thing:3578797 ), I printed the helmet in different sizes and tried to use as little support structure as possible. I share my experience with you in the video. This Video shows…
Ironing flow test for your filaments. How often the top layer that was ironed it's cracked or lines still visible ? No more failed top layers. Specially with PETG you need to fine adjust the ironing flow to achieve the best results.…
The original finecoar Grind Setting Dial V2.0 for all new Eureka Mignon grinders Now also compatible with all* new Eureka Mignon models! For more information, please continue reading under Compatibility. If you'd like to buy a finished…
Use 100% infill, mine was printed with Prusament PLA and it can tank shots from a Tokyo Marui GBB pistol with no problems (300ish FPS). You can make it thicker (source file included) or stick something on the front to absorb the impact if…
This is yet-another-calibration tower, with several tests for overhang/bridge performance, but also other tiny features that I think represent common use cases in detailed 3D printing. One of the things the Bambu X1/X1C/P1P printers…
Github now: Sovol SV08 - Optimized G-Code / Macro.cfg / printer.cfg and highspeed settings PETG Further releases and instructions on GITHUB: https://github.com/kampfwuffi/Sovol-SV08-Optimized-Macros HOW HARD IS IT TO IMPLEMENT? Basically…
Goku from Dragonball. Print Settings: Layer Height 0.15 Fill density:15% Supports: yes First layer density 90%. Infill 15%
Only suitable to use with an LED candle or light source. Not recommended to use with real candles . Print instructions Print 6 SIDE panels TOP and MID parts require support May need to adjust the horizontal expansion of some parts to make…
This is just an improved Printer Profile and Print Settings for the Kobra S1 that increases printing speeds significantly, while not loosing out on quality. I have increased the max speeds for the motion limits of the printer as well as…
Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…
This project uses low temps, high extractions, slow speeds, and several other tweaks to remove oozing and major defects with this specific TPU filament. Make sure to have your tensioner screw as loose as possible and use a 0.4mm nozzle.…
After countless hours of testing and retesting, these are my support settings tuned as best I can to have easy to remove supports that make the best supported layer that I could get. Over 100 models tested locally with these settings…
Best: PrusaSlicer(v5 added TPU profile), For custom background go to https://www.thingiverse.com/thing:4091968 EXTRA: S3D profiles (simplify3d) and PrusaSlicer(better), Note: Extruder Calibration (…
The updated original finecoar Grind Setting Dial V2.1 for all new Eureka Mignon grinders Print if yourself?! The finecoar GSD V2.1 is fully open source under CC BY-NC 4.0 DEED and the printable files are available on Printables and…
Design The Eureka Mignon is a fantastic coffee grinder for espresso or Aeropress as well as filter coffee or French Press. It has only one flaw: The grind is well adjustable, but not well READJUSTABLE. The dial can be adjusted over…
Modified Orca Slicer settings for my Neptune 3 Pro and added graph scale markers.
Remix (what I changed) I added two slightly different target patterns to each of the targets, as to allow for more precise aiming and a deeper, more refined practice. The pattern has a height of -0.5mm, as to make the pattern easily…
01/12/23, Added Updated .3mf. Bambu Studio settings tuned for eSUN PLA+ After loading the .3mf there is setting changes in all 3 sections which interact to produce the end result. If you just use the comparison charts to make your own…
Contiguous United States (Lower 48) Topographic Map with Hydrographic Features For those times when you just want to print everything at once – this is the lower 48 states in the USA of Plastic project combined into a single model. Lower…
I have made some Profiles for myself to Print these Nylons and wanted to share these for others to use. These are for the P1S but they probably work for the X1C aswell, i am using Orca Slicer and the 0.4mm Nozzle.
Settings Clock was inspired and remixed from Extruder Visualizer by GerryPB . The wall clock mechanism was this one from Amazon. Everything is sized to simple snap together, and clock mechanism comes threaded so you should be able to…
Please Read Description Only thing to be aware of is the Z offset in Nozzle Settings! Currently set at 0 to ensure your bed isn't going to get damaged but for my machine its set to -0.12, First layer prints at 0.15mm so allowing for great…
My calibrated, exported settings from Bambu Studio for Eco PLA from 3D Jake. Flow Dynamics Calibration and Flow Rate calibrated with 0.4 hardened steel nozzle. You can download the zip-file. I had to upload a 3D file to publish these…
This contain many settings for PETG There was no support in this print
Bambu's new TPU-For-AMS is a contentious material , primarily because the default profile is not good (which is often true, sadly). Annoyed that I got 4 rolls of this stuff that kept breaking along Z-layer lines, I set out to fix this. I…
Why did I make this? Well, BambuStudio is based on PrusaSlicer but has a few extra functions (and a few missing - I think the differences will grow with the applications' further development). So I thought it should be just logical to…
Weirdly enough, it's sort of hard to find a calibration table for ironing flow + speed. Also, Reddit seems to have wildly different settings they live by for PETG. This model leaves no guesswork. The models have different thickness…
REMIX CHANGES: I combined the three pieces that constitute the supporting structure/base for the target. The original relied on gravity, and maybe some friction to keep the structure together. This version is stronger and more rigid, but…
Start G-Code: M211 S0 ; disable travel limits G92 E0 ;reset extruder G28 ;home M420 S1 Z10 ;use bed mesh G1 Z10.0 F4000 move Z axis G1 X-10 Y20 Z10 F5000.0 ;move to start position G92 E0 ;zero the extruded length G1 F200 E10 ;extrude ooze…
Pequeño archivo de calibración con varias geometrías. Cruz baja: 40mmx40mm Cortes cilindros, hexágonos y triángulos: radio 3mm grandes / 2mm pequeños Cubo calibración: 20mm x 10mm Cilindro superior: 10mm radio Cilindros superiores x2:…
Like the original, plus overhang print test and bridge print test
All aboard for the next level of 3D printing! 3DBenchy XL takes the world’s most famous benchmark boat and transforms it into a fully functional mini containership , perfectly designed to carry the very popular SHIPPING CONTAINER by…
Do you still have a stock MK3S or MK3S+ and need a bit more speed out of it for day-to-day stuff? This is the answer. This is my 0.32 layer height profile for 0.4 nozzles with every tweak I could come up with and I also included my custom…
Files Can be downloaded at: https://www.thingiverse.com/thing:5984898 I had to upload a link because Printables doesn't allow me to upload the actual Json files that orca uses for their slicer. however thingiverse does allow it.. so thats…
See Text file for settings, orcaslicer profile in the .zip. To add go to file-Import-Import Configs and it should add it in. It will only show under bambu p1s 0.4mm nozzle size To avoid confusion. the filament will be added under the…
Rear suspension IFP depth setting tool
I designed this tool cause in airsoft you often want to adapt your sights to other guns to save some money or you just want to adapt your sight to heavier BBs or what ever. Anyway, if you run around on a airsoft field you certainly do not…
This is a useful platform that mounts onto the base of a hand-setting press. It creates a wide, stable surface with clearance for a variety of movement holders. The surface aides in the process of installing watch hands by allowing…
The quicker version has less triangles thus being quicker but has less details. Im just a teenager trying to earn some experience so if you could please download my model it would be much appreciated.
TEST your prints faster with this model. try different temperatures, infills, filaments, settings, and more with this model that will give you a good idea on what are the best settings. faster than a benchy boat and smaller details. less…
Hi, these are my settings for perfect TPU prints with my CR10 Smart Pro and Fiberflex 40D from Fiberlogy with Orca Slicer and Klipper. For Cura with Marlin: https://www.printables.com/model/977198-cura-cr10-smart-pro-tpu-perfect-settings…
A remix of the "Uni knob" from @ordnerino that makes it possible to use the Grind Setting Dial with the original knob
Disclaimer: Please don't expect this to be a “download-and-drop-in” modification that immediately works. Getting TPU/Flexibles to work reliably during a true multi-material print is tricky and will required understanding of your machine!…
There are many options in the veici menu when making RC Airplane settings. A practical model airplane platform for you to use in the learning process. Micro Servo (180°) : https://s.click.aliexpress.com/e/_oFrSYAH
Edited original to increase size by 150% and increase vertical support thickness after snapping a few arms of the original airsoft version Print 1x Axle, Frame Base and Target. Print 2x Vertical Support 0.2mm layer height 5 wall shell…
I had a lot of issues with the prusa original files&settings on my MK3s printers - perimeters did not stick, so lots of stringing on the inside for example. I modified my settings according to tips from Stefan of CNCKitchen and now print…
For me, a very good slicer profile (PrusaSlicer) for Anycubic Kobra series printers (2/2 Pro/Neo, etc.). Still undergoing my testing, but I already rate it as very good. Please ensure proper bed height and dimensions to avoid…
That's are my settings to print Eryone TPU with (or without) supports. Be carefull: USE texured plate. Probably it's possible to use also smooth plane, but you have to use paper glue to avoid that the material cannot be detached.…
This is a tool used when installing or replacing the shift cable for Shimano Alfine internal geared hubs.
This ring fits directly on your stock dial like this ring for the first version. The advantage is a smoother dialing experience since you dont have a 3D-printed thread. to tighten up, i used a M3x6 screw, but it still sticks out. you can…
I have only printed in PLA so far, but will try PETG. Print settings (CURA) 5 walls Slicing tolerance exclusive 20% infill Assembly is fairly straightforward, the spinner body can hold 2 AA batteries for a counterweight but other heavy…
A tool to set a consistent base thickness for cups, pots or bowls while throwing on a wheel.
The following PDF contains custom settings that work better than the default profile included with the Flashforge Creator 5 and Creator 5 Pro. Most of these settings will also work with the Flashforge AD5X and possibly other printers such…
Shrinkage setting - Perpendicularity check - axes X/Y/Z
After the success of my PLA/PETG/ASA support settings ( https://www.printables.com/model/272542-best-prusa-mk3ss-support-settings-for-prusaslicer) I Bring you the TPU version! After countless hours of testing and retesting on TPU, these…
I created this organizer for the stuff I use when applying water-slide decals.
If you're wondering, this model got taken down, but then randomly appeared on my draft section, so here it is. Here are the BonkersBenchy settings, with a few modifications. I will also include the bgcode for the benchy and a few others.…
This is a Fine Grind Setting Dial for Eureka Mignon MCI There are some for newer models but not for MCI, so i decided to do one for MCI which I Own. Gear Ratio is ⅓ so with 33 on Knob and 99 on Main Gear, dial scale is divided to 160.…
Remix of DutchDeveloper's ‘The best Bambulab Glass Top Led Raiser mod’ which has two issues: The slot is too close to the inside edge, causing slicer to generate holes in the wall. The slot fitment at 0.20mm is way too loose for my…
Wave ring setting designed to hold 0.5ct gemstone. The best approach is to print out the model and cast it in your metal of choice.
Unzip and import into Flash Studio for a better printing experience. feet are a direct replacement, use original screws and washers
I have been FDM printing mini's for a decade. I am publishing my latest settings. These are for MK4 but the settings should apply to any other printer. Updated June 2026: I made some changes as well as argued with AI for further insights.…
Remix (what I changed) I added a target pattern to each of the targets, as to allow for more precise aiming and a deeper, more refined practice. The pattern has a height of 1mm, as to make the pattern easily visible. Dual Color This model…
Hi, these are my settings for perfect TPU prints with my CR10 Smart Pro and Fiberflex 40D from Fiberlogy with Cura. For Orca Slicer: https://www.printables.com/model/977082-orca-slicer-cr10-smart-pro-tpu-perfect-settings This setting was…
Hi every one, I deliver you my final result after hours and hours (I mean dayssss… Near 1 month) of tests with several PET Bottles on the X1C Bambu Lab I test (i don't know if it is the same name in your country), just ask if needed :…
This is an angle setting jig for a Lie-Nielson Honing Guide. Made to be printable on MK3(s). I'd recommend printing the supports on the bottom of the model.
This is a simple tool I created to accurately set my PINDA probe on my MK2.5S and MK3S. It's easier to use and more repeatable than a zip-tie. Print instructions Print out of PLA .4 Nozzle 30% infill
This is an extruder rotation visualizer in the theme of iOS settings icon for NEMA 17 motors on the Original Prusa i3. This is a remix of Extruder Visualizer from GerryPB . Video Clip Remix Changes Made the printing and assembly more…
I recently designed this Crown Race Setting Tool for seating the Crown Race on my Fox 34 Suspension Fork by forcing it into place with a rubber mallet. The Tool provides a total operation height up to 190mm. Make sure to print it with the…
Tronnic's original item makes use of the “After Layer Change” custom g-code to change the temperature between each layer. I create a simple Python script that leverages a comment that gets inserted at each layer change, and will combine…
These G-Code files help you to easily feed 200 mm of filament through your nozzle at different flow rates in order to adjust your Idler tension. Just copy the files onto your SD card, pre-heat your hotend and select the one you want.…
I've always wanted to find a functional way of using infill patterns. I remixed a hexagonal design to be printable with whatever infill pattern you want (see below for some printing tips). Remix This is based on @Matthew_Ghost's soap dish…
I've been experimenting with Prusa Slicers' Fuzzy Skin setting. I wanted to better visualize how adjusting thickness vs point distance affects the look and feel of the print. I chose domes displaying the fuzzy setting, with a partial part…
all credit to the original designer , I just sliced up the model in bambu so it's a littler easier to print and get started, I also consolidated the materials list so it is less easy to procrastinate. --- print settings build guide —…
Its the Netflix logo in 3d. I added some Metallic Texture and some lights but still the original colors. The cover image is a rendered photen with a 8k resolution. You can change or delete some lights and change the materials for other…
Part holds a dial indicator on BXA sized tool posts. This allows the user to set the compound to the exact right angle to follow a tapered part for reproduction of that angle. This could be for a morse taper, R8 taper, or some other…
Good settings for Duramic 95a TPU on the prusa mini.
Intro A small model (30x30 mm) to test your printer settings and capabilities. I needed something different to what is available here and there, so I designed this model. It is quite fast to print. Complex geometry Small models Chamfers,…
Just another one of the many 3D printed tools used to set the IFP depth found in most oil damped mountain bike shocks. Printed in PLA with default settings as the tool undergoes little if any stress. I did use a "fine" layer setting of…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
Einstellungen für ein den X1C. Material - Sunlu PETG Clear Bitte eine Glitzer Platte einlegen. Die Druckoberfläche sollte maximal Glatt sein wie ein Spiegel! Die Texturierte Platte bitte auswählen(Platten erkennung aus!)
Remote holder for disabled individuals or those struggling to store their remote places
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
I maintain enhanced machine, filament, and process profiles for Snapmaker Orca in the following GitHub repo: https://github.com/jeremyreeder/snorca-profiles Purposes To improve print quality compared to factory-provided profiles. To…
Fed up with having to manually adjust thread faces in Fusion 360 to give a clearance, I worked on creating an adjusted Fusion 360 Thread parameter file. Note even these maximum clearance threads will still require ‘breaking in’ so that…
Prusa Mk3S+ Mosquito Magnum with MMU3 Settings/Profiles PLA_PETG Now we can enjoy the magnum on the mk3s+ with the latest R6 release. V2 Update Updated parts for more room and now every STL is included now. V3 UPDATE After weeks and…
Check google for CRS-1 by Park Tool for usage instructions. Made an extra top where you hit it with the hammer. PLA perfectly survived my try. 40% gyriod infill with 4 walls and 7 bottom and 5 top.
Here is my final tuned Specs for Sunlu's PA6-CF. just watch your Nozzle height and you'll be just fine!
The original stand worked perfectly fine for my iPad when I did not have a case. Instead of enlarging the setting block and reprinting and wasting material I decided to make this setting block that fits snuggly in the original setting…
this has a lot of peoples works, i will list them below. https://www.makeronline.com/en/model/Version%202%20of%20optimized%200.4mm%20Profiles%20for%20Kobra%20S1%20-%20Faster,%20Smoother,%20Quieter!/167680.html?trackModuleType=6…
A remix of BrokenPoet's excellent blade setting tool for Delta thickness planers. The original tools are no longer available from Delta and are often not sold with the planers because they are not stored with the machine. This remix…
Introducing the Workshop Holder for ETA 6497 Watch Movement - a versatile and customizable tool for watch enthusiasts and professionals alike. This 3D printing file allows you to create a sturdy and practical holder specifically designed…
Honeycomb Grid for ULANZI VL49 – 3 Sizes This is a snap-on honeycomb grid for the ULANZI VL49 LED light . It helps control light spread and gives a more focused, softer beam – perfect for video, photography, or macro use. Features: ✅…
Gridfinity Watchmaker Buergeon Hand Setting Tools
Tired of walking back and forth to reset your targets? Meet The Walker — a self-resetting, reactive airsoft target designed for endless shooting practice. Every successful hit flips the target, making it "walk" away from you or along your…
Hi, these are my settings for perfect Greentec Pro Carbon prints with my CR10 Smart Pro 0.6 nozzle, Orca Slicer and Klipper Check my other CR10 Smart Pro Profiles for Orca Slicer and Cura! I've also shared some filament presets and…
I have a Wanhao i3+ (with Microswiss hotend) which, let's face it, is a positively geriatric printer at this point. It's always struggled with getting clean seams on certain prints after a move, no matter how much or how little retraction…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
One of my frustrations with the MMU2 experience is that I was never looking at it when an event occured that caused a load error, unload error, skipped layer etc. In addition I wanted a way to quickly assess the effect of Slic3r settings…
this tool is used to adjust the leviq sensor distance and nozzle tip
![[finecoar] Grind Setting Dial V2.1 for Eureka Mignon](https://media.printables.com/media/prints/777304/images/6039888_4ce2cf05-2e19-4e57-b1fe-74c1b6c4f185_63bb1ffc-94d1-4e5a-895f-4ec86adb5f53/right_round.jpg)
![{Centauri Carbon} Sunlu PA6-CF Print Settings [TESTED]](https://media.printables.com/media/prints/4b87310f-1985-4a14-807f-0738d4a7228d/images/13227500_85e80e49-d5c2-41f4-bfb8-654dd0a621f1_ee4351d2-1afa-456d-8e8c-0296ea797f40/screenshot-2026-06-27-010544.png)
