3D Jake Eco PLA 1.75mm Filament Settings Bambu Studio Calibrated for X1C 0.4 Nozzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Calibrated Filament Settings for 3D Jake Eco PLA on my X1C for Bambu Studio
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 627
- Wydruki
- 0
- Wyświetlenia
- 2408
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
My calibrated, exported settings from Bambu Studio for Eco PLA from 3D Jake. Flow Dynamics Calibration and Flow Rate calibrated with 0.4 hardened steel nozzle. You can download the zip-file. I had to upload a 3D file to publish these settings.
I upload this settings because I like the Eco PLA filament series from 3D Jake and it took my quiet some time to calibrate all my thirdparty filaments. Especially the transparent ones, which you can not calibrate automaticly. I had to do it manualy.
15.01.2024 include:
- Black
- White
- Frosted Grey
- Red
- Orange
I will upload more filament settings when I have calibrated them.
I have not imported any filament settings by now in Bambu Studio. So you have to figure it out on your own how to do this.