Adventurer 5M PRO squash ball feet V2

The idea behind these feet was to find the best possible equation among 4 variables:

• they should be solid enough to firmly hold the heavy printer in place (should be reasonably massive);
• they should be wide enough to mitigate as much vibration as possible (should be as wide as possible);
• the printer should still remain as compact as possible with them (shouldn't be placed too far away from the printer's body);
• the printer's center of gravity has to remain as low as possible (shouldn't raise the printer too high from the floor/base).

Based on these premises, these things were ultimately born.

Probably best printed with 3-5 walls and around 10-25% infill for extra sturdiness (the latter might even come out a bit overkill, but that heavily depends on your infill pattern of choice. Mine are 9% CrossHatch (which is a quite dense pattern itself) in PLA and they work quite fine. Supports are absolutely necessary, auto organic trees will do just fine.

!Please note!

These feet are for the PRO version of FF Ad5M only. The basic and pro versions are different on the bottom due to the lack of side panels on the standart.

All the files are named according to how it looks when you look at the printer from the front. I.e. FR is the closest on your right-hand side.

As usual - using balls with 2 yellow dots (the softest ones) is recommended.

_________________________________________________________________________

Please feel free to share your makes, remixes and comments!