Nintendo Switch Joycon Charging Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a DIY solution for charging Joycons
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 453
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since my Nintendo Switch is weird it doesn't want to charge the right joycon while connected to che console, so I had to buy a charging cable, it was messy and the controllers kept rolling and falling every time, so, I got tired of it (and not wanting to spend more money to buy an aftermarket charging dock) I designed mine.
It's specifically designed to work with this adapter I bought from Amazon https://www.amazon.it/dp/B0CJWWSVVZ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_5 the cable passes through the channels in the base and is kept in place (and hidden) by the tower part. It uses 3 screws to hold it together and the threads are already present in the model (but feel free to use heat inserts if you prefer)
I also include the .f3d and .obj files in case you need to modify the model to fit your adapters if you don't want to use mine or can't find it.
PRINT SETTINGS:
Material: PLA is fine, but you can use whatever you like
Walls: 3
Infill: 10%
Layer height: 0.2
Precise Walls: On
Wall Order: In/Out/In for better accuracy
IMPORTANT: make sure your printer is well calibrated, do a tolerance test before printing, and set the slicer properly
As always, please share your makes and comments, I'd love to know what you think about it, happy printing!