1 / 2
Soap Saver Dish – Hex Drain Design
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Honeycomb soap dish keeps bars dry, clean, and fresh - ideal for cold process soaps like Dr. Squatch
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tired of your fancy artisan soaps turning into mushy sadness? This 3D-printed soap saver features a honeycomb-style drainage grate to keep your cold process bars high, dry, and fresh between uses.
I designed this dish specifically with bar soaps like Dr. Squatch in mind—shown in the photos is a halved bar sitting pretty and drying fast. The hex grid lifts the soap while allowing airflow underneath, and the outer wall contains drips without holding puddles.
Features
- Clean honeycomb drain design
- Great for cold process or natural soaps
- Keeps your bars drier and longer-lasting
- Two-piece print, no supports needed
- Fits standard bar sizes (Dr. Squatch bar shown cut in half)
Printing Notes:
- Print in PLA, PETG, or ASA depending on your bathroom environment
- 0.2mm layer height recommended
- Infill: 15–20% is plenty
- No supports required