1 / 2
8-Bit Easter Eggs - Fridge Magnet (Hot-Swap, Multi-Color) | Decoration For Whiteboard, Refrigerator, Locker, Cabinet | Home & Kitchen Essential, Classroom Office Supplies |
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Happy Easter (2025)
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Spring & Easter
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then just resume the print. Specified magnet offers great hold and adds style to any fridge, white board or office cubical!
Notes:
- Can also be recognized as having multiple bodies for easy multi-color printing with a Multi-Material System (MMS). Just use the “Split to Parts” function on the model in your slicer.
- Only three filament colors required. (Different color shading in model is achieved through layer thicknesses.)
- No supports needed
Extra Materials needed:
- A 12x3mm (or smaller) Neodymium Magnet
- Glue (User choice but I would recommend CA glue)
Creator Support:
- If you like my work, please support what I do using the following links