CPAP Umbilical bulkhead fitting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified version of the Mammoth 3D Voron CPAP umbilical bulkhead fitting to suit my HevORT build using a 20 mm CPAP
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A slightly modified version of the original Mammoth 3D CPAP hose bulkhead to fit my HevORT build. Original adaptation by a member of the HevORT community, you know who you are ;-) , text added by me.
This bulkhead can be combined with the 20 mm CPAP hose adapters available on my Printables page. In my setup, the CPAP fan is connected to this bulkhead fitting with a 20 mm CPAP hose. On the inside of the printer, a 15 mm CPAP hose is used as part of the umbilical. This lowers the drag in the CPAP hose for large printers using a long CPAP hose assembly for part cooling.
The umbilical comprises the 15 mm CPAP hose with all wires and water cooling hoses in a circular pattern around the CPAP hose using clips available on my page.