1 / 5
Retractable Pen (PIP)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
retracts 3mm ∅ refill 12mm by twisting 120° — pen length = 100mm
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 155
- Wydruki
- 1
- Wyświetlenia
- 1478
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (46)Powiązane
This is a fully working print in place pen with retraction mechanism by twisting the lower ring 120° to move the refill out.
The test can be used to ensure to meet the 0.35mm clearance spec
- max nozzle = 0.4 (thinnest wall is 0.4)
- internal support needs layer = 0.08 also for smooth mechanics
- if you scale this up in z - increase layer height accordingly e.g. 0.08*1.25 (125%)=0.1
- use a brim or raft for stability
- no supports
post Print
- To make this working start with wiggling the ring and twist a little until the internal support breaks free.
- Use a stick or refill from the back to move the internal slider for the first time. And twist the Ring until it fully moves and rotates 120° or ⅓ turn.
- Use a little grease or PTFE/Silicone Spray for best performance
Refill
put a 3mm in from the front - if it is too long the excess will come out at the end so you can cut it (or leave).