1 / 5
Retractable Pen (PIP)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
retracts 3mm ∅ refill 12mm by twisting 120° — pen length = 100mm
- Rating
- 0 / 5
- Likes
- 39
- Downloads
- 155
- Makes
- 1
- Views
- 1,478
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Public Domain
This is a fully working print in place pen with retraction mechanism by twisting the lower ring 120° to move the refill out.
The test can be used to ensure to meet the 0.35mm clearance spec
- max nozzle = 0.4 (thinnest wall is 0.4)
- internal support needs layer = 0.08 also for smooth mechanics
- if you scale this up in z - increase layer height accordingly e.g. 0.08*1.25 (125%)=0.1
- use a brim or raft for stability
- no supports
post Print
- To make this working start with wiggling the ring and twist a little until the internal support breaks free.
- Use a stick or refill from the back to move the internal slider for the first time. And twist the Ring until it fully moves and rotates 120° or ⅓ turn.
- Use a little grease or PTFE/Silicone Spray for best performance
Refill
put a 3mm in from the front - if it is too long the excess will come out at the end so you can cut it (or leave).