Dewalt Jigsaw holder for Multiboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for Dewalt jigsaw (DCS335) on Multiboard.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a holder for my Dewalt jigsaw (DCS335) on Multiboard. Other holders I have seen hold the jigsaw by its shoe and its center of mass is high up, so they might break over time. So I created two "hooks" that put the weight closer to the Multiboard tile(s) and holds the jigsaw firmly.
The holders are using Heavy Weight-Bearing Hook Snap and bolt locking with Multipoint to make sure it is firmly secured to the Multiboard tiles.
So you need the following snaps/Multipoint to use the holder:
- 2 pcs - Heavy Weight-Bearing Hook Snap (1 for each holder)
- 2 pcs - Moderate Weight-Bearing Snap (1 for each holder)
- 4 pcs - Small Thread - Multipoint (2 for each holder)
The Multiboard is created by Jonathan from Keep Making - https://www.multiboard.io/