1 / 8
Core One/+ _ _ _ Elektronic cover, print No MMU — zdjęcie 1
1 / 8

Core One/+ _ _ _ Elektronic cover, print No MMU

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

"The cover conceals the screw holes of the original cover and adds a colorful Prusa inscription." Print without mmu unit

Ocena
5 / 5
Polubienia
25
Pobrania
30
Wydruki
1
Wyświetlenia
260
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

 

 

Logo print 

print 0,2mm structural

3 perimeters

 

 

Cap Print

Print PETG

0,2mm structural

0,4n

2 perimeters

perimeters at a height of 1.4mm set to 7 see 3mf

default profile only slightly changed see 3mf

 

 

Assembly

assembly as in the Psu cover model on my profile

photo of logo assembly used from PSU cover model

Core One cover PSU, print No MMU od autora Očko | Stáhněte si zdarma STL model | Printables.com

 

"For the assembly, I used super glue and paper tape. The tape is not mandatory, but it simplifies the assembly and can remain afterwards."

 

 

 

 

"Apply the glue as much as possible to the edges of the model; only a small amount is needed to prevent the glue from getting onto the surface."

 

 

"For alignment, the letter can be pressed from the back against a firm surface; caution is needed here to ensure that excess glue does not seep onto the surface."

 

final result

 

 

 

Tagi