Core One/+ _ _ _ Elektronic cover, print No MMU
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
"The cover conceals the screw holes of the original cover and adds a colorful Prusa inscription." Print without mmu unit
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 30
- Makes
- 1
- Views
- 260
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Logo print
print 0,2mm structural
3 perimeters

Cap Print
Print PETG
0,2mm structural
0,4n
2 perimeters
perimeters at a height of 1.4mm set to 7 see 3mf
default profile only slightly changed see 3mf

Assembly
assembly as in the Psu cover model on my profile
photo of logo assembly used from PSU cover model
Core One cover PSU, print No MMU od autora Očko | Stáhněte si zdarma STL model | Printables.com
"For the assembly, I used super glue and paper tape. The tape is not mandatory, but it simplifies the assembly and can remain afterwards."


"Apply the glue as much as possible to the edges of the model; only a small amount is needed to prevent the glue from getting onto the surface."

"For alignment, the letter can be pressed from the back against a firm surface; caution is needed here to ensure that excess glue does not seep onto the surface."

final result
