1 / 3
80mm Passive Radiator – Flexible Speaker Enhancement (TPU) — zdjęcie 1
1 / 3

80mm Passive Radiator – Flexible Speaker Enhancement (TPU)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

80mm passive radiator, designed to enhance bass response in small DIY speaker enclosures.

Ocena
4 / 5
Polubienia
21
Pobrania
132
Wydruki
1
Wyświetlenia
604
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

UPDATE:
You should go with this multi-material version instead:




This is an experimental 80mm passive radiator, designed to enhance bass response in small DIY speaker enclosures.

I printed in TPU, and added the option for a M6 screw as weight in the center to tune the resonance. The design is meant to be flexible, yet symmetric for clean movement.

It's my first attempt at building a passive radiator – so this is definitely a work in progress. I'd love your feedback!

How does it perform for you? Any suggestions for improvement? What weight did you use in the center?

🪙 Center Weight (Optional):
The design allows for adding a central weight (M6 screw and nut) to tune the resonance frequency.
The membrane is intentionally closed, so this step is optional – you can carefully pierce the thin membrane center only if you decide to install a weight.
 

📐 all relevant measurements can be found in the included TechDraw

🔊 for compact speaker boxes with limited space for bass ports.




🖨 Print Settings / Instructions:

Membrane:

Material: TPU
Layer height: 0.2 mm
Supports: Not needed
Infill: 100% (or dense grid) for central weight


Seam position: ⚠ Set to Random in your slicer!
→ This is important to avoid tiny leaks or weak spots in the membrane.







 


Blend ring:

Material: PETG or whatever you like
Supports: Not needed

👉 Leave a comment if you tried it – I'm really curious how it works in your setup!

I used FreeCAD as Software

EDIT: I added the corresponding FreeCAD file.

Tagi