80mm Passive Radiator – Flexible Speaker Enhancement (TPU)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
80mm passive radiator, designed to enhance bass response in small DIY speaker enclosures.
- Rating
- 4 / 5
- Likes
- 21
- Downloads
- 132
- Makes
- 1
- Views
- 604
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE:
You should go with this multi-material version instead:
This is an experimental 80mm passive radiator, designed to enhance bass response in small DIY speaker enclosures.
I printed in TPU, and added the option for a M6 screw as weight in the center to tune the resonance. The design is meant to be flexible, yet symmetric for clean movement.
It's my first attempt at building a passive radiator – so this is definitely a work in progress. I'd love your feedback!
How does it perform for you? Any suggestions for improvement? What weight did you use in the center?
🪙 Center Weight (Optional):
The design allows for adding a central weight (M6 screw and nut) to tune the resonance frequency.
The membrane is intentionally closed, so this step is optional – you can carefully pierce the thin membrane center only if you decide to install a weight.

📐 all relevant measurements can be found in the included TechDraw
🔊 for compact speaker boxes with limited space for bass ports.
🖨 Print Settings / Instructions:

Membrane:
Material: TPU
Layer height: 0.2 mm
Supports: Not needed
Infill: 100% (or dense grid) for central weight
Seam position: ⚠ Set to Random in your slicer!
→ This is important to avoid tiny leaks or weak spots in the membrane.

Blend ring:
Material: PETG or whatever you like
Supports: Not needed
👉 Leave a comment if you tried it – I'm really curious how it works in your setup!
I used FreeCAD as Software
EDIT: I added the corresponding FreeCAD file.